| Set Point command settings group |
The following settings are available when the Set Point command is selected.
- Origin Offset — Offsets the placement origin for the entire frame.
- Origin X, Y, Z — Enter values in the X, Y, and Z fields to define the new location for the frame origin. Or enter mnemonic values in the X, Y, and Z fields to set parameters described in the following table.
|
Field
|
Mnemonic
|
Distance
|
|
X
|
RH
|
Horizontal recess.
|
| |
TH
|
Horizontal tolerance.
|
| |
RR
|
Roller blind recess.
|
|
Y
|
WI
|
Thickness, interior wall.
|
| |
CA
|
Thickness, cavity.
|
| |
WE
|
Thickness, exterior wall.
|
|
Z
|
RV
|
Vertical recess.
|
| |
TV
|
Vertical tolerance.
|
Note: Mnemonic values can be used when creating parametric frames. A mnemonic value is an arithmetic function used as a substitute for a real number. For example, a dimension (or distance) for frame width can be defined as W1/3, where width is divided by three. The advantage of using mnemonic values is to enable a parametric frame to maintain its proportions regardless of modifications to the frame size.
|
